Menu

Search resultsProducts found: 232

This solid carbide engraver tip with fine 60 degree tip can be used to create fine lines or deep grooves. For use in the Dremel 290 Engraver and other brands that accept a 3.2mm diameter tip. FOR MATERIALS Mild steel, stainless steel, glass, ceramics, plastic, wood and leather etc....
Diamond coated hole saws are perfect for drilling holes in glass, marble, tile, granite and other very hard materials. These are good for bathroom projects where you have to mount mirrors and the like on top of tiles. Each holesaw has a 3.2mm shank (1/8"), meaning they can be used in...
DESIC DIAMOND COATED HOLE SAWS FOR DREMEL 10 PIECES 5MM
Save 54%
Diamond coated hole saws are perfect for drilling holes in glass, marble, tile, granite and other very hard materials. These are good for bathroom projects where you have to mount mirrors and the like on top of tiles. Each holesaw has a 3.2mm shank (1/8"), meaning they can be used in...
For use in the Dremel 290 Engraver. This tip is suitable for continuous use and commercial work. The diamond tip will last longer than the standard Dremel tungsten tip and is able to engrave harder materials like stainless steel and titanium. FOR MATERIALS Stainless steel,...
DESIC MINI SAW BLADES FOR DREMEL 22-44MM 6 PIECE SET
Save 20%
Check out these bad boys! It's like a set of little circular saws for your Dremel Rotary Tool. They work really well on wood and other materials such as plastic and composites etc. With plastic they actually cut instead of melting it like a lot of cutters do. Also good for...
DESIC TUNGSTEN CARBIDE ROTARY BURR SET 10 PIECE 3MM SH FOR DREMEL
Save 40%
SH = Small Head These tungsten carbide rotary burrs have a small 3mm shank which fit all Dremel rotary tools. Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They...
These tungsten carbide rotary burrs have a small 3.2mm shank which fit all Dremel rotary tools. Tungsten carbide rotary burrs have a wide range of applications when machining mild steel, carbon steel, cast iron, stainless steel and aluminium etc. They remove material many...
These high speed wood carving burrs are made of High Speed Steel (HSS) for extra durability. They are good for carving and shaping wood, plastic and other soft materials like plaster of paris etc. The shanks are 3.2mm which fit all Dremel (and similar brands like Ozito, Foredom and Ryobi) rotary...
Replacement tip for use with the Dremel Engraver. The solid carbide tip can be used to create fine lines or deep grooves. SPECIFICATIONS Length 18mm Diameter 3.2mm Note Not compatible with Dremel Rotary tools (4000, 3000, 8220, 4200 etc) CONTENTS 1 x Dremel...
The Dremel Engraver lets you engrave or decorate a wide variety of materials including metal, plastic, glass, ceramic, wood, and leather. The variable stroke control allows you to etch both fine lines and deep grooves. FEATURES Reciprocating action Adjustable stroke depth...
This is a GENUINE Dremel product supplied in a retail blister pack*. There are copies out there that may not perfectly match the fine thread on your Dremel tool. This 3-jaw chuck holds drills and accessories from 0.4mm to 3.4mm (shank size) so it makes changing accessories a lot quicker...
This is the perfect tool for precise carving, engraving, grinding, sanding, cutting, sharpening, and polishing. FEATURES - Cordless Rotary tool for optimum convenience - EZ Twist nose cap wrench  - Fully variable speed - 15 accessories SPECIFICATIONS Speed setting Fully Variable...
GENUINE DREMEL PART To open your Dremel you will need to remove the screws with a long Torx bit. The side labels must also be removed (or carefully cut through the middle of the label with a box cutter knife) before the clamshell housing can be split apart. This part is suitable for...
GENUINE DREMEL PART If you can't lock the shaft on your Dremel 3000 or older model 300 rotary tool then you may have worn out the locking pin. This can happen over time with a lot of use and also if you happen to bump the lock button while the machine is running. To open your Dremel...
GENUINE DREMEL PART To open your Dremel you will need to remove the screws with a long Torx bit. The side labels will also need to be removed (or carefully cut through the middle of the label with a box cutter knife) before the clamshell housing can be split apart. This part is...
This part is for an old model and is subject to availability from our Supplier. Please check with us before ordering.   GENUINE DREMEL PART Fits Dremel 300 only, not compatible with other models. Part number 4 from the parts diagram - see image NOTE Spare parts...
DREMEL 3000 ROTARY TOOL KIT WITH 26 ACCESSORIES 3000-1/26 F0133000PM
Save 6%
The Dremel 3000 features the new EZ Twist™ nose lock system. The collet spanner is integrated into the nose cap so you just twist it on and off to tighten and release the collet nut. No need for a separate spanner. Another improvement is 3000 model shorter than its predecessor the Dremel 300 but...
The Dremel 3000 features the new EZ Twist nose lock system. The collet spanner is integrated into the nose cap so you just twist it on and off to tighten and release the collet nut. No need for a separate spanner. Another improvement is 3000 model shorter than its predecessor...
GENUINE DREMEL PART Compatible with Dremel 200, 300, 3000, 275, 285, 395 Part number 12 from the parts diagram - see image NOTE Spare parts cannot be returned so please choose carefully. We can supply other Bosch and Dremel spare parts...
GENUINE DREMEL PART Fits Dremel 3000 (Part number F013300049) only, not compatible with other models. To open your Dremel 3000 you will need to remove the screws with a long T8 Torx bit. The side labels will also need to be removed (or carefully cut through the middle of the label...
Show another 20 products