Wishlist
Menu

Bestsellers

DREMEL 3000 ROTARY TOOL KIT WITH 26 ACCESSORIES 3000-1/26 F0133000PM
Save 6%
Dremel 3000 Rotary Tool Kit With 26 Accessories 3000-1/26 F0133000PM
0.0
In stock
$15900 $16900 -6%
+ −
The Dremel 3000 features the new EZ Twist™ nose lock system. The collet spanner is integrated into the nose cap so you just twist it on and off to tighten and release the collet nut. No need for a separate spanner. Another improvement is 3000 model shorter than its predecessor the Dremel 300 but...
DREMEL 3000 ROTARY TOOL WITH 30 ACCESSORIES 3000-2/30 F0133000PN
Dremel 3000 Rotary Tool With 30 Accessories 3000-2/30 F0133000PN
0.0
In stock
$20900
+ −
The Dremel 3000 features the new EZ Twist nose lock system. The collet spanner is integrated into the nose cap so you just twist it on and off to tighten and release the collet nut. No need for a separate spanner. Another improvement is 3000 model shorter than its predecessor...
DREMEL 3000 SPARE PART NUMBER 3 - ARMATURE 230V 2610009848
Dremel 3000 Spare Part Number 3 - Armature 230V 2610009848
0.0
In stock
$6490
+ −
GENUINE DREMEL PART Fits Dremel 3000 (Part number F013300049) only, not compatible with other models. To open your Dremel 3000 you will need to remove the screws with a long T8 Torx bit. The side labels will also need to be removed (or carefully cut through the middle of the label...
DREMEL 3000 SPARE PART NUMBER 30 - NOSE COVER 2610013854
Dremel 3000 Spare Part Number 30 - Nose Cover 2610013854
0.0
In stock
$1590
+ −
GENUINE DREMEL PART . Compatible With Dremel 100, 200, 275, 285, 300, 3000, 395, 396, 398, 400, 4000, 4200, 4300, 780, 7750, 800, 8000, 8200, 8220 Not Compatible With Dremel Stylo 2050+, Dremel 7020 Pet Grooming, Dremel Stylus, Dremel Micro Part number 30 from...
DREMEL 3000 SPARE PART NUMBER 4 - SPEED SWITCH 2610021221
Dremel 3000 Spare Part Number 4 - Speed Switch 2610021221
0.0
In stock
$5540
+ −
GENUINE DREMEL PART Fits Dremel 3000 only, not compatible with other models. To open your Dremel 3000 you will need to remove the screws with a long T8 Torx bit. The side labels will also need to be removed (or carefully cut through the middle of the label with a box cutter knife)...
DREMEL 400 MOTOR BRUSHES 2610907940
Save 28%
Dremel 400 Motor Brushes 2610907940
0.0
In stock
$2290 $3200 -28%
+ −
The motor brushes in your Dremel tool will wear down with normal use so they should be checked every 50 hours or so. To check them unplug the tool and unscrew (lefty loosey) the brush caps with a small flat head screwdriver. The carbon brushes are held in with springs which should come out...
DREMEL 4000 SPARE PART - MOTOR BRUSH CAP 2610006518
Save 50%
Dremel 4000 Spare Part - Motor Brush Cap 2610006518
0.0
In stock
$645 $1290 -50%
+ −
GENUINE DREMEL PART Motor Brush Cap for Dremel 4000 Rotary tool Supplied as one unit. NOTE Spare parts cannot be returned so please choose carefully. We can supply other Bosch and Dremel spare parts so get in touch if you need something for your angle grinder,...
DREMEL 4000 SPARE PART NUMBER 2 - FIELD COIL 2610004556
Save 10%
Dremel 4000 Spare Part Number 2 - Field Coil 2610004556
0.0
In stock
$3800 $4200 -10%
+ −
GENUINE DREMEL PART Fits Dremel 4000 and 4200 only, not compatible with other models.  To open your Dremel 4000 you will need to remove the screws with a long T8 Torx bit. The side labels will also need to be removed (or carefully cut through the middle of the label with a box...
DREMEL 4000 SPARE PART NUMBER 25 - ELECTRONIC SPEED SWITCH 230V 2610003445
Dremel 4000 Spare Part Number 25 - Electronic Speed Switch 230V 2610003445
0.0
In stock
$9900
+ −
GENUINE DREMEL PART Fits Dremel 4000 only, not compatible with other models.  To open your Dremel 4000 you will need to remove the screws with a long T8 Torx bit. The side labels will also need to be removed (or carefully cut through the middle of the label with a box cutter...
DREMEL 4000 SPARE PART NUMBER 3 - ARMATURE 230V 2610004557
Save 30%
Dremel 4000 Spare Part Number 3 - Armature 230V 2610004557
0.0
In stock
$6900 $9900 -30%
+ −
GENUINE DREMEL PART Fits Dremel 4000 only, not compatible with other models.  To open your Dremel 4000 you will need to remove the screws with a long T8 Torx bit. The side labels will also need to be removed (or carefully cut through the middle of the label with a box cutter...
DREMEL 4000 SPARE PART NUMBER 812 - MOTOR BRUSHES 2610005646
Dremel 4000 Spare Part Number 812 - Motor Brushes 2610005646
0.0
In stock
$2990
+ −
GENUINE DREMEL PART Fits Dremel 4000 only, not compatible with other models. Dremel calls these the brush-spring set , number 812 in the parts diagram. The motor brushes in your Dremel tool will wear down with normal use so they should be checked every 50 hours or so. To check...
DREMEL 4200, 4250 AND 4300 MOTOR BRUSHES 2610021241
Dremel 4200, 4250 and 4300 Motor Brushes 2610021241
0.0
In stock
$2390
+ −
The motor brushes in your Dremel tool will wear down with normal use so they should be checked every 50 hours or so. To check them unplug the tool and unscrew (lefty loosey) the brush caps with a small flat head screwdriver. The carbon brushes are held in with springs which should come out...
DREMEL 4250 WITH 35 ACCESSORIES 4250-35A F0134250NA
Dremel 4250 With 35 Accessories 4250-35A F0134250NA
0.0
In stock
$24400
+ −
Dremel 4250 is the most powerful member of Dremel corded Rotary-Tool family. It is steady in power throughout the toughest applications whether it may be drilling, cutting, sanding, or more. The Dremel 4250 runs cooler and has lower noise, and lower vibration (compared to Dremel 4000 and 4300)...
DREMEL 4300 ARMATURE 230V 1604010B73
Dremel 4300 Armature 230V 1604010B73
0.0
In stock
$9900
+ −
GENUINE DREMEL PART Dremel 4300 Armature 230V Part No 1604010B73 Fits Dremel 4300 only, not compatible with other models.   Spare parts cannot be returned so please choose carefully.
DREMEL 4300 SPARE PART NUMBER 2 - FIELD COIL 2610047644
Dremel 4300 Spare Part Number 2 - Field Coil 2610047644
0.0
In stock
$4900
+ −
GENUINE DREMEL PART To open your Dremel you will need to remove the screws with a long Torx bit. The side labels will also need to be removed (or carefully cut through the middle of the label with a box cutter knife) before the clamshell housing can be split apart. This part is...
DREMEL 4300 SPARE PART NUMBER 4 - ELECTRONIC ASSEMBLY 1600A00M8P
Dremel 4300 Spare Part Number 4 - Electronic Assembly 1600A00M8P
0.0
In stock
$8900
+ −
GENUINE DREMEL PART Fits Dremel 4300 only, not compatible with other models. Part number 4 from the parts diagram - see image NOTE Spare parts cannot be returned so please choose carefully. We can supply other Bosch and Dremel spare parts so...
DREMEL 729 CARVING AND ENGRAVING MICRO KIT 11 PIECE 729-02 26150729AA
Dremel 729 Carving and Engraving Micro Kit 11 Piece 729-02 26150729AA
0.0
In stock
$4990
+ −
This kit contains a variety of 11 different accessories for engraving, etching, and carving applications on leather, metal, ceramics, wood and glass. Suitable for all model Dremel Rotary tools and their knock-offs like Ryobi, Fuller, Ozito, GMC and other generic brands that have a 3.2mm...
DREMEL 8240 12V ROTARY TOOL KIT 8240-5 12V F0138240NA
Dremel 8240 12V Rotary Tool Kit 8240-5 12V F0138240NA
0.0
In stock
$19800
+ −
The Dremel 8240 is a powerful cordless multi-tool designed to give you complete control. Experience the same exceptional power as the corded Dremel 4250 but without the constraints of being tethered to a socket.   This portable marvel allows you to work at your preferred location...
DREMEL ACCESSORY KIT 160 PIECE 710 26150710AK
Dremel Accessory Kit 160 Piece 710 26150710AK
0.0
In stock
$10900
+ −
This kit contains a variety of 160 different accessories for cutting, grinding, sanding, cleaning and polishing etc. Suitable for all model Dremel Rotary tools and their knock-offs like Ryobi, Fuller, Ozito, GMC and other generic brands that have a 3.2mm collet (which is 99% of rotary...
DREMEL ALUMINIUM OXIDE GRINDING STONE 15.9MM 8193 2615008193
Save 70%
Dremel Aluminium Oxide Grinding Stone 15.9mm 8193 2615008193
0.0
In stock
$390 $1290 -70%
+ −
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding on most materials including stainless steel. For best results, insert the accessory bit all...
Show another 20 products