Phone 09 834 0212

|
menu
menu

Cutting

Sort by: Popularity
96 Per Page
Desic Diamond Lapidary Saw Blade 150mm x 0.7mm
Add to wish list
Desic Diamond Lapidary Saw Blade 150mm x 0.7mm
  $39.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Desic Diamond Coated Cutting Wheels 16-50mm 8 Piece Set
Add to wish list
Desic Diamond Coated Cutting Wheels 16-50mm 8 Piece Set
  $37.90 (Incl. GST)

This top-quality diamond-coated cutting wheel set from Desic is especially suited for cutting and shaping hard materials and plastics. The wheels are...

In stock
+ −
Bosch GSG300 Foam Cutter Blades 220mm 2607018011 IS
Add to wish list
Bosch GSG300 Foam Cutter Blades 220mm 2607018011 IS
  $139.00 (Incl. GST)

Replacement blades for the Bosch Foam Rubber Cutter GSG300 0601575137 SPECIFICATIONS Working length 220mm Total length 240mm Set of 2 blades...

In stock
+ −
Desic Diamond Coated Cutting Wheels 40mm 3 Piece Set
Add to wish list
Desic Diamond Coated Cutting Wheels 40mm 3 Piece Set
  $24.90 (Incl. GST)

This top-quality diamond-coated cutting wheel set from Desic is especially suited for cutting and shaping hard materials and plastics. The wheels are...

In stock
+ −
Bosch GSG300 Foam Cutter Blades 300mm 2607018012 IS
Add to wish list
Bosch GSG300 Foam Cutter Blades 300mm 2607018012 IS
  $159.00 (Incl. GST)

Replacement blades for the Bosch Foam Rubber Cutter GSG300 0601575137 SPECIFICATIONS 300mm long Set of 2 blades Bosch part number 2 607...

In stock
+ −
  • Save 4%
Bosch Expert for Steel Blade 305mm 60T 2608643060
Add to wish list
Bosch Expert for Steel Blade 305mm 60T 2608643060
$259.00   $249.00 (Incl. GST)

FOR CUTTING Soft steel, non-ferrous metals, pipes, profiles, sheet metals, rods, cable ducts FEATURES Clean cut Long Life...

In stock
+ −
Tusk Diamond Blade Continuous Tile 180mm TCB180
Add to wish list
Tusk Diamond Blade Continuous Tile 180mm TCB180
  $46.90 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, and Granite FEATURES Faster cutting than segmented blades Smoother more professional finish Dry or...

In stock
+ −
Dremel Saw-Max Multi-Purpose Flush Cut Carbide Wheel SM600 2615S600NA
Out of stock
Add to wish list
Dremel Saw-Max Multi-Purpose Flush Cut Carbide Wheel SM600 2615S600NA
  $45.00 (Incl. GST)

20/04/2020 Discontinued - refer to MTP Dremel Saw-Max Multi-purpose Flush Cut Carbide Wheel MTP-SM600   For use with Dremel Saw-Max Cutting...

  • Save 17%
Desic Diamond Lapidary Saw Blade 300mm x 1.5mm
Add to wish list
Desic Diamond Lapidary Saw Blade 300mm x 1.5mm
$119.00   $99.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Desic Diamond Coated Cutting Wheels 50mm 3 Piece Set
Add to wish list
Desic Diamond Coated Cutting Wheels 50mm 3 Piece Set
  $29.00 (Incl. GST)

This top-quality diamond-coated cutting wheel set from Desic is especially suited for cutting and shaping hard materials and plastics. The wheels are...

In stock
+ −
Bosch GSG300 Foam Cutter Blade Guide 300mm 2608135022 IS
Add to wish list
Bosch GSG300 Foam Cutter Blade Guide 300mm 2608135022 IS
  $249.00 (Incl. GST)

Blade guide for the Bosch Foam Rubber Cutter GSG300 0601575137 SPECIFICATIONS 300mm long   Bosch part number 2608135022 

In stock
+ −
Desic Diamond Coated Cutting Wheel 100mm 100 Grit
Add to wish list
Desic Diamond Coated Cutting Wheel 100mm 100 Grit
  $12.90 (Incl. GST)

This double sided diamond coated cutting wheel is extremely durable, it will not not break and retains it shape. The thin 0.9mm profile allows precise cuts...

In stock
+ −
Bosch GSG300 Foam Cutter Blade Guide 220mm 2608135021
Add to wish list
Bosch GSG300 Foam Cutter Blade Guide 220mm 2608135021
  $249.00 (Incl. GST)

Blade guide for the Bosch Foam Rubber Cutter GSG300 0601575137 SPECIFICATIONS 220mm long   Bosch part number 2608135021 

In stock
+ −
Desic Diamond Lapidary Saw Blade 200mm x 0.3mm
Add to wish list
Desic Diamond Lapidary Saw Blade 200mm x 0.3mm
  $35.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Desic Diamond Coated Cutting Wheels 25mm 3 Piece Set
Add to wish list
Desic Diamond Coated Cutting Wheels 25mm 3 Piece Set
  $22.90 (Incl. GST)

This top-quality diamond-coated cutting wheel set from Desic is especially suited for cutting and shaping hard materials and plastics. The wheels are...

In stock
+ −
Desic Diamond Lapidary Saw Blade 350mm x 1.0mm
Add to wish list
Desic Diamond Lapidary Saw Blade 350mm x 1.0mm
  $119.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Tusk Diamond Blade Continuous Tile 200mm TCB200
Add to wish list
Tusk Diamond Blade Continuous Tile 200mm TCB200
  $66.90 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, and Granite FEATURES Faster cutting than segmented blades Smoother more professional finish Dry or...

In stock
+ −
Desic Tungsten Carbide End Mill 4 Flute 3mm
Add to wish list
Desic Tungsten Carbide End Mill 4 Flute 3mm
  $14.90 (Incl. GST)

These are top quality end mills made of solid carbide so it's a step up from common HSS end mills. SPECIFICATIONS 4 flutes Solid carbide End...

In stock
+ −
Desic Diamond Lapidary Saw Blade 150mm x 0.3mm
Add to wish list
Desic Diamond Lapidary Saw Blade 150mm x 0.3mm
  $29.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Desic Diamond Sintered Lapidary Blade 250mm x 1mm
Add to wish list
Desic Diamond Sintered Lapidary Blade 250mm x 1mm
  $129.00 (Incl. GST)

Diamond sintered blades are 10 times more durable than diamond coated. The thin kerf means you're not wasting a lot of precious stone making the cut....

In stock
+ −
Desic Diamond Lapidary Saw Blade 400mm x 1.2mm
Add to wish list
Desic Diamond Lapidary Saw Blade 400mm x 1.2mm
  $179.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Desic Diamond Blade Continuous Tile 180mm
Add to wish list
Desic Diamond Blade Continuous Tile 180mm
  $55.00 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, Granite FEATURES Ultra thin, cuts faster than segmented blades Smoother more professional...

In stock
+ −
Desic Diamond Lapidary Saw Blade 250mm x 0.8mm
Add to wish list
Desic Diamond Lapidary Saw Blade 250mm x 0.8mm
  $65.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Bosch Multi Material Angle Grinder Cut Off Disc 105mm 2608603043
Add to wish list
Bosch Multi Material Angle Grinder Cut Off Disc 105mm 2608603043
  $9.00 (Incl. GST)

These cutting discs are amazing the thin kerf slices through materials so fast, mush faster than the thicker typs of cutting wheel and they seem to last...

In stock
+ −
  • Save 50%
Bosch GSG Foam Rubber Cutter Foot Plate 2608000908 IS
Out of stock
Add to wish list
Bosch GSG Foam Rubber Cutter Foot Plate 2608000908 IS
$199.00   $99.00 (Incl. GST)

FEATURES > Foot plate for Bosch and Consew foam rubber cutters > Base Plate for GSG300   WHAT YOU GET Bosch GSG Foam Rubber...

Desic Diamond Lapidary Saw Blade 200mm x 1.0mm
Add to wish list
Desic Diamond Lapidary Saw Blade 200mm x 1.0mm
  $55.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Desic Diamond Sintered Lapidary Blade 350mm x 1.5mm
Add to wish list
Desic Diamond Sintered Lapidary Blade 350mm x 1.5mm
  $219.00 (Incl. GST)

There is a 7-10 day lead time for this item. Diamond sintered blades are 10 times more durable than diamond coated. The thin kerf means you're not...

In stock
+ −
Tusk PCD Diamond Blade for Fibre Cement 254mm TPFC254
Add to wish list
Tusk PCD Diamond Blade for Fibre Cement 254mm TPFC254
  $179.00 (Incl. GST)

FOR CUTTING Concrete based sheet materials FEATURES Lasts up to 15 times longer than tungsten carbide blades Less dust than diamond blades...

In stock
+ −
Desic Tungsten Carbide End Mill 4 Flute 2mm
Add to wish list
Desic Tungsten Carbide End Mill 4 Flute 2mm
  $12.90 (Incl. GST)

These are top quality end mills made of solid carbide so it's a step up from common HSS end mills. SPECIFICATIONS 4 flutes Solid carbide End...

In stock
+ −
Asada Cutter Blade For Steel Pipes SP04510
Add to wish list
Asada Cutter Blade For Steel Pipes SP04510
  $69.00 (Incl. GST)

COMPATIBLE WITH Asada Beaver 50 Threading Machine Asada Beaver 80 Threading Machine Asada Beaver 100 Threading Machine   FEATURES...

In stock
+ −
Desic Tungsten Carbide End Mill 4 Flute 6mm
Add to wish list
Desic Tungsten Carbide End Mill 4 Flute 6mm
  $21.00 (Incl. GST)

These are top quality end mills made of solid carbide so it's a step up from common HSS end mills. SPECIFICATIONS 4 flutes Solid carbide End...

In stock
+ −
Tusk PCD Diamond Blade for Fibre Cement 160mm TPFC160
Add to wish list
Tusk PCD Diamond Blade for Fibre Cement 160mm TPFC160
  $105.00 (Incl. GST)

FOR CUTTING Concrete based sheet materials FEATURES Lasts up to 15 times longer than tungsten carbide blades Less dust than diamond blades...

In stock
+ −
Desic Tungsten Carbide End Mill 4 Flute 8mm
Add to wish list
Desic Tungsten Carbide End Mill 4 Flute 8mm
  $28.00 (Incl. GST)

These are top quality end mills made of solid carbide so it's a step up from common HSS end mills. SPECIFICATIONS 4 flutes Solid carbide End...

In stock
+ −
Desic Tungsten Carbide End Mill 4 Flute 12mm
Add to wish list
Desic Tungsten Carbide End Mill 4 Flute 12mm
  $49.00 (Incl. GST)

These are top quality end mills made of solid carbide so it's a step up from common HSS end mills. SPECIFICATIONS 4 flutes Solid carbide End...

In stock
+ −
Desic Tungsten Carbide End Mill 2 Flute 1mm
Add to wish list
Desic Tungsten Carbide End Mill 2 Flute 1mm
  $9.90 (Incl. GST)

These are top quality end mills made of solid carbide so it's a step up from common HSS end mills. SPECIFICATIONS 2 flutes Solid carbide End...

In stock
+ −
Desic Tungsten Carbide End Mill 4 Flute 10mm
Add to wish list
Desic Tungsten Carbide End Mill 4 Flute 10mm
  $39.00 (Incl. GST)

These are top quality end mills made of solid carbide so it's a step up from common HSS end mills. SPECIFICATIONS 4 flutes Solid carbide End...

In stock
+ −
Desic Tungsten Carbide End Mill 4 Flute 5mm
Add to wish list
Desic Tungsten Carbide End Mill 4 Flute 5mm
  $18.90 (Incl. GST)

These are top quality end mills made of solid carbide so it's a step up from common HSS end mills. SPECIFICATIONS 4 flutes Solid carbide End...

In stock
+ −
  • Save 10%
Bosch Stainless Steel (Inox) Cut-off Wheel 105mm 2608603047
Out of stock
Add to wish list
Bosch Stainless Steel (Inox) Cut-off Wheel 105mm 2608603047
$9.90   $8.90 (Incl. GST)

These cutting discs are amazing the thin kerf slices through materials so fast, mush faster than the thicker typs of cutting wheel and they seem to last...

Minimum quantity for "Bosch Stainless Steel (Inox) Cut-off Wheel 105mm 2608603047" is 2.

Tusk PCD Diamond Blade for Fibre Cement 305mm TPFC305
Add to wish list
Tusk PCD Diamond Blade for Fibre Cement 305mm TPFC305
  $269.00 (Incl. GST)

FOR CUTTING Concrete based sheet materials FEATURES Lasts up to 15 times longer than tungsten carbide blades Less dust than diamond blades...

In stock
+ −
Desic Tungsten Carbide End Mill 4 Flute 4mm
Add to wish list
Desic Tungsten Carbide End Mill 4 Flute 4mm
  $16.90 (Incl. GST)

These are top quality end mills made of solid carbide so it's a step up from common HSS end mills. SPECIFICATIONS 4 flutes Solid carbide End...

In stock
+ −
Desic Diamond Blade Continuous Tile 105mm
Add to wish list
Desic Diamond Blade Continuous Tile 105mm
  $24.90 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, Granite FEATURES Ultra thin, cuts faster than segmented blades Smoother more professional...

In stock
+ −
  • Save 14%
Bosch Flexible Hose 35mm x 2200mm 2609256F29
Add to wish list
Bosch Flexible Hose 35mm x 2200mm 2609256F29
$72.00   $62.00 (Incl. GST)

FEATURES - Dust collector hose with airflow regulation - Flexibility for overhead applications - Hose range for external dust...

In stock
+ −
Tusk Diamond All Cut Blade 230mm TAC230
Add to wish list
Tusk Diamond All Cut Blade 230mm TAC230
  $40.90 (Incl. GST)

FOR CUTTING Stone, Concrete, Asphalt, Steel, Plastic, Sandstone, Wood and Fibreboard FEATURES Vacuum brazed diamond is fused directly...

In stock
+ −
Desic Tungsten Carbide End Mill 4 Flute 7mm
Add to wish list
Desic Tungsten Carbide End Mill 4 Flute 7mm
  $23.00 (Incl. GST)

These are top quality end mills made of solid carbide so it's a step up from common HSS end mills. SPECIFICATIONS 4 flutes Solid carbide End...

In stock
+ −
  • Save 20%
Bosch Starlock Max Multi-tool Bi-Metal Plunge Cut Blade For Wood + Metal 32mm x 80mm 1ERMAIZ32APB 2608664930
Add to wish list
Bosch Starlock Max Multi-tool Bi-Metal Plunge Cut Blade For Wood + Metal 32mm x 80mm 1ERMAIZ32APB 2608664930
$39.90   $32.00 (Incl. GST)

The Starlock MAIZ 32 APB blade delivers extra-deep cuts in wood and non-hardened metal. It has a robust BIM (bi-metal) combination of an HCS (high carbon...

In stock
+ −
  • Save 18%
Bosch Starlock Max Multi-tool Bi-Metal Plunge Cut Blade For Wood + Metal 52mm x 70mm 1ERMAII52APB 2608662574
Add to wish list
Bosch Starlock Max Multi-tool Bi-Metal Plunge Cut Blade For Wood + Metal 52mm x 70mm 1ERMAII52APB 2608662574
$55.00   $45.00 (Incl. GST)

The Starlock MAII 52 APB blade delivers extra-wide, deep cuts in wood and non-hardened metal. It has a robust BIM (bi-metal) combination of an HCS (high...

In stock
+ −
Desic Diamond Blade Continuous Tile 115mm
Add to wish list
Desic Diamond Blade Continuous Tile 115mm
  $29.90 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, Granite FEATURES Ultra thin, cuts faster than segmented blades Smoother more professional...

In stock
+ −
Desic Diamond Blade Continuous Tile 125mm
Add to wish list
Desic Diamond Blade Continuous Tile 125mm
  $32.90 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, Granite FEATURES Ultra thin, cuts faster than segmented blades Smoother more professional...

In stock
+ −
  • Save 27%
Bosch Expert Depth Stop For Starlock Multi-tool EXPERT 2608000590
Add to wish list
Bosch Expert Depth Stop For Starlock Multi-tool EXPERT 2608000590
$28.90   $21.00 (Incl. GST)

Compatible with Bosch Multi-tool models Bosch GOP 12V-28, GOP 18V-28, GOP 30-28, GOP 40-30, GOP 14.4V/18V-Li, GOP 300 SCE FEATURES > For...

In stock
+ −
  • Save 36%
Tusk Carbide Grout And Mortar Removal Blade
Add to wish list
Tusk Carbide Grout And Mortar Removal Blade
$55.00   $35.00 (Incl. GST)

For removing grout and mortar with your Oscillating Multi-Tool (OMT). Use the round sections for the straights and the pointy end to get in the corners. Can...

In stock
+ −
Tusk Diamond Blade Continuous Tile 125mm TCB125
Add to wish list
Tusk Diamond Blade Continuous Tile 125mm TCB125
  $28.90 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, and Granite FEATURES Faster cutting than segmented blades Smoother more professional finish Dry or...

In stock
+ −
Tusk PCD Diamond Blade for Fibre Cement 185mm TPFC185
Add to wish list
Tusk PCD Diamond Blade for Fibre Cement 185mm TPFC185
  $119.00 (Incl. GST)

FOR CUTTING Concrete based sheet materials FEATURES Lasts up to 15 times longer than tungsten carbide blades Less dust than diamond blades...

In stock
+ −
Tusk Tungsten Carbide Blade for Steel 165mm TSCB165
Add to wish list
Tusk Tungsten Carbide Blade for Steel 165mm TSCB165
  $76.00 (Incl. GST)

FOR CUTTING Steel (Mild steel only, not suitable for stainless) FEATURES Clean cutting without dags and burrs  Faster than black...

In stock
+ −
  • Save 2%
Bosch Starlock Multi-tool Accessory Set For Tiling 4 Piece OMTSET
Add to wish list
Bosch Starlock Multi-tool Accessory Set For Tiling 4 Piece OMTSET
$152.00   $149.00 (Incl. GST)

Use this product with all Starlock, Starlock Plus and Starlock Max power tools. Starlock Interface compatible with 95% of all Multi-Tools....

In stock
+ −
Bosch Sabre Saw Blade 150mm 6TPI 2 Pack S711DF 2608656272
Add to wish list
Bosch Sabre Saw Blade 150mm 6TPI 2 Pack S711DF 2608656272
  $24.90 (Incl. GST)

RECOMMENDED USE  Wood with nails/metal, chipboard, synthetic material, glass fibre reinforced plastic/epoxy  FEATURES Heavy for wood...

In stock
+ −
Tusk Diamond All Cut Blade 125mm TAC125
Add to wish list
Tusk Diamond All Cut Blade 125mm TAC125
  $20.90 (Incl. GST)

FOR CUTTING Stone, Concrete, Asphalt, Steel, Plastic, Sandstone, Wood and Fibreboard FEATURES Vacuum brazed diamond is fused directly...

In stock
+ −
Tusk Diamond Blade General Purpose Turbo 105mm TGP105
Add to wish list
Tusk Diamond Blade General Purpose Turbo 105mm TGP105
  $22.90 (Incl. GST)

FOR CUTTING Concrete, ceramic, porcelain, terracotta, soft stone, bricks and pavers FEATURES Faster cutting than segmented blades Smoother...

In stock
+ −
Tusk Tungsten Carbide Blade for Steel 136mm TSCB136
Add to wish list
Tusk Tungsten Carbide Blade for Steel 136mm TSCB136
  $64.90 (Incl. GST)

FOR CUTTING Steel (Mild steel only, not suitable for stainless) FEATURES Clean cutting without dags and burrs  Faster than black...

In stock
+ −
  • Save 20%
Bosch Starlock Max Multi-tool HCS Plunge Cut Blade For Wood 32mm x 80mm 1ERMAIZ32EPC 2608662568
Add to wish list
Bosch Starlock Max Multi-tool HCS Plunge Cut Blade For Wood 32mm x 80mm 1ERMAIZ32EPC 2608662568
$39.90   $32.00 (Incl. GST)

The Starlock MAIZ 32 EPC blade delivers extra-deep cuts in wood. Its 80 mm length increases the blade's reach for extended cuts. Use this product with...

In stock
+ −
Desic Diamond Lapidary Saw Blade 600mm x 2.0mm
Add to wish list
Desic Diamond Lapidary Saw Blade 600mm x 2.0mm
  $599.00 (Incl. GST)

This item sometimes has a lead time, call us for availability before ordering if you need it urgently. These diamond lapidary cutting blades cut nice...

In stock
+ −
Desic Diamond Sintered Lapidary Blade 400mm x 1.5mm
Add to wish list
Desic Diamond Sintered Lapidary Blade 400mm x 1.5mm
  $319.00 (Incl. GST)

There is a 7-10 day lead time for this item. Diamond sintered blades are 10 times more durable than diamond coated. The thin kerf means you're not...

In stock
+ −
Tusk Diamond Blade Continuous Tile 180mm Big Bore TCB180BB
Out of stock
Add to wish list
Tusk Diamond Blade Continuous Tile 180mm Big Bore TCB180BB
  $84.00 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, and Granite FEATURES Faster cutting than segmented blades Smoother more professional finish Dry or...

Tusk Tungsten Carbide Blade for Steel 185mm TSCB185
Add to wish list
Tusk Tungsten Carbide Blade for Steel 185mm TSCB185
  $115.00 (Incl. GST)

FOR CUTTING Steel (Mild steel only, not suitable for stainless) FEATURES Clean cutting without dags and burrs  Faster than black...

In stock
+ −
Tusk Diamond Blade General Purpose Turbo 125mm TGP125
Add to wish list
Tusk Diamond Blade General Purpose Turbo 125mm TGP125
  $25.90 (Incl. GST)

FOR CUTTING Concrete, ceramic, porcelain, terracotta, soft stone, bricks and pavers FEATURES Faster cutting than segmented blades Smoother...

In stock
+ −
Garrick Replacement Bandsaw Blade 2460 x 27 x 0.9mm 8/12TPI for BS260
Add to wish list
Garrick Replacement Bandsaw Blade 2460 x 27 x 0.9mm 8/12TPI for BS260
  $119.90 (Incl. GST)

For Garrick Bandsaw Model BS260 SPECIFICATIONS Cutting capacity: 102mm-279mm (4"- 11") Length: 2460mm Width: 27mm Thickness: 0.9mm TPI: 8/12...

In stock
+ −
Desic Diamond Lapidary Saw Blade 180mm x 1.0mm
Add to wish list
Desic Diamond Lapidary Saw Blade 180mm x 1.0mm
  $49.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Bosch GSG300 Foam Cutter Blade Guide 130mm 2608135020
Out of stock
Add to wish list
Bosch GSG300 Foam Cutter Blade Guide 130mm 2608135020
  $229.00 (Incl. GST)

Blade guide for the Bosch Foam Rubber Cutter GSG300 0601575137 SPECIFICATIONS 130mm long   Bosch part number 2 608 135 020 

Tusk General Purpose Blade 400mm TMIC400
Add to wish list
Tusk General Purpose Blade 400mm TMIC400
  $239.00 (Incl. GST)

The Tusk Major Infrastructure Combination blades make the cut better and faster, when other blades just make the cut! FOR CUTTING Expansion joints,...

In stock
+ −
  • Save 9%
Bosch Starlock Multi-tool Accessory Set For Hardened Wood & Metal 3 Piece 3ERSETOMT 2608662223
Add to wish list
Bosch Starlock Multi-tool Accessory Set For Hardened Wood & Metal 3 Piece 3ERSETOMT 2608662223
$109.00   $99.00 (Incl. GST)

Use this product with all Starlock, Starlock Plus and Starlock Max power tools. Starlock Interface compatible with 95% of all Multi-Tools....

In stock
+ −
Tusk Tungsten Carbide Blade for Steel 305mm TSCB30560T
Add to wish list
Tusk Tungsten Carbide Blade for Steel 305mm TSCB30560T
  $159.00 (Incl. GST)

FOR CUTTING Steel (Mild steel only, not suitable for stainless) FEATURES Clean cutting without dags and burrs  Faster than black...

In stock
+ −
Tusk Diamond Blade General Purpose Turbo 115mm TGP115
Add to wish list
Tusk Diamond Blade General Purpose Turbo 115mm TGP115
  $23.90 (Incl. GST)

FOR CUTTING Concrete, ceramic, porcelain, terracotta, soft stone, bricks and pavers FEATURES Faster cutting than segmented blades Smoother...

In stock
+ −
Tusk Diamond Blade Continuous Tile 230mm TCB230
Add to wish list
Tusk Diamond Blade Continuous Tile 230mm TCB230
  $72.00 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, and Granite FEATURES Faster cutting than segmented blades Smoother more professional finish Dry or...

In stock
+ −
Tusk Diamond Blade General Purpose Turbo 180mm TGP180
Add to wish list
Tusk Diamond Blade General Purpose Turbo 180mm TGP180
  $49.90 (Incl. GST)

FOR CUTTING Concrete, ceramic, porcelain, terracotta, soft stone, bricks and pavers FEATURES Faster cutting than segmented blades Smoother...

In stock
+ −
Tusk Diamond Blade Continuous Tile 115mm TCB115
Add to wish list
Tusk Diamond Blade Continuous Tile 115mm TCB115
  $27.90 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, and Granite FEATURES Faster cutting than segmented blades Smoother more professional finish Dry or...

In stock
+ −
Tusk Diamond All Cut Blade 180mm TAC180
Add to wish list
Tusk Diamond All Cut Blade 180mm TAC180
  $36.90 (Incl. GST)

FOR CUTTING Stone, Concrete, Asphalt, Steel, Plastic, Sandstone, Wood and Fibreboard FEATURES Vacuum brazed diamond is fused directly...

In stock
+ −
Tusk Diamond Blade General Purpose Turbo 230mm TGP230
Add to wish list
Tusk Diamond Blade General Purpose Turbo 230mm TGP230
  $74.00 (Incl. GST)

FOR CUTTING Concrete, ceramic, porcelain, terracotta, soft stone, bricks and pavers FEATURES Faster cutting than segmented blades Smoother...

In stock
+ −
Topman Replacement PVC Pipe Saw Blade 300mm BLAP-04KL
Add to wish list
Topman Replacement PVC Pipe Saw Blade 300mm BLAP-04KL
  $49.50 (Incl. GST)

In stock
+ −
  • Save 14%
Bosch Starlock Multi-tool Bi-Metal Plunge Cut Blade For Hardwood 32mm x 50mm 5 Pack 5ERAIZ32APB 2608664906
Add to wish list
Bosch Starlock Multi-tool Bi-Metal Plunge Cut Blade For Hardwood 32mm x 50mm 5 Pack 5ERAIZ32APB 2608664906
$139.00   $119.00 (Incl. GST)

The Starlock AIZ 32 BSPB blade offers long life in hardwood. It has a robust BIM (bi-metal) combination of an HCS (high carbon steel) blade and HSS...

In stock
+ −
Tusk Diamond Blade General Purpose Turbo 180mm Big Bore TGP180BB
Add to wish list
Tusk Diamond Blade General Purpose Turbo 180mm Big Bore TGP180BB
  $76.00 (Incl. GST)

FOR CUTTING Concrete, ceramic, porcelain, terracotta, soft stone, bricks and pavers FEATURES Faster cutting than segmented blades Smoother...

In stock
+ −
Tusk General Purpose Blade 350mm TMIC350
Add to wish list
Tusk General Purpose Blade 350mm TMIC350
  $212.00 (Incl. GST)

The Tusk Major Infrastructure Combination blades make the cut better and faster, when other blades just make the cut! FOR CUTTING Expansion joints,...

In stock
+ −
Tusk Diamond Blade Continuous Tile 105mm TCB105
Add to wish list
Tusk Diamond Blade Continuous Tile 105mm TCB105
  $24.90 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, and Granite FEATURES Faster cutting than segmented blades Smoother more professional finish Dry or...

In stock
+ −
  • Save 13%
Bosch Starlock Multi-tool Bi-Metal Plunge Cut Blade For Wood & Metal 32mm x 50mm 5 Pack 5ERAIZ32APB 2608664909
Add to wish list
Bosch Starlock Multi-tool Bi-Metal Plunge Cut Blade For Wood & Metal 32mm x 50mm 5 Pack 5ERAIZ32APB 2608664909
$149.00   $129.00 (Incl. GST)

The Starlock AIZ 32 APB blade offers long life for wide cuts in wood, metal and plastics. It has a robust BIM (bi-metal) combination of an HCS (high carbon...

In stock
+ −
  • Save 5%
Bosch Circular Saw Blade for Wood 140mm PRO542TS 2608644644
Add to wish list
Bosch Circular Saw Blade for Wood 140mm PRO542TS 2608644644
$189.00   $179.00 (Incl. GST)

RECOMMENDED USE Softwood, hardwood, plywood, chipboard, parquet, MDF FEATURES - Precision Pro Series Track Saw Blade - Designed for Bosch...

In stock
+ −
Desic Diamond Lapidary Saw Blade 180mm x 0.5mm
Add to wish list
Desic Diamond Lapidary Saw Blade 180mm x 0.5mm
  $32.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Garrick Replacement Bandsaw Blade 2460 x 27 x 0.9mm 6/10TPI for BS260
Add to wish list
Garrick Replacement Bandsaw Blade 2460 x 27 x 0.9mm 6/10TPI for BS260
  $119.00 (Incl. GST)

For Garrick Bandsaw Model BS260 SPECIFICATIONS Cutting capacity: 102mm-279mm (4"- 11") Length: 2460mm Width: 27mm Thickness: 0.9mm TPI: 6/10...

In stock
+ −
Bosch Starlock All in One Multi-tool Accessory Set For Wood & Metal 13 Piece ALLROUNDER 2608661694
Out of stock
Add to wish list
Bosch Starlock All in One Multi-tool Accessory Set For Wood & Metal 13 Piece ALLROUNDER 2608661694
  $89.00 (Incl. GST)

Use this product with all Starlock, Starlock Plus and Starlock Max power tools. Starlock Interface compatible with 95% of all Multi-Tools....

Desic Diamond Lapidary Saw Blade 300mm x 1.0mm
Add to wish list
Desic Diamond Lapidary Saw Blade 300mm x 1.0mm
  $89.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Garrick Replacement Bandsaw Blade 1640 x 13 x 0.6mm 10/14TPI for BSB128
Out of stock
Add to wish list
Garrick Replacement Bandsaw Blade 1640 x 13 x 0.6mm 10/14TPI for BSB128
  $99.00 (Incl. GST)

For Garrick Bandsaw Model BS115 and BS128 SPECIFICATIONS Cutting capacity: 102mm-279mm (4"- 11") Length: 1640mm Width: 12mm Thickness: 0.6mm TPI:...

Bosch Starlock Multi-tool Accessory Set For Flooring + Fittingt 4 Piece OMTSET 2608661696
Add to wish list
Bosch Starlock Multi-tool Accessory Set For Flooring + Fittingt 4 Piece OMTSET 2608661696
  $165.00 (Incl. GST)

Use this product with all Starlock, Starlock Plus and Starlock Max power tools. Starlock Interface compatible with 95% of all Multi-Tools....

In stock
+ −
Garrick Replacement Bandsaw Blade 1136 x 12 x 0.65mm 14TPI for BS100
Add to wish list
Garrick Replacement Bandsaw Blade 1136 x 12 x 0.65mm 14TPI for BS100
  $82.00 (Incl. GST)

For Garrick Bandsaw Model BS100 SPECIFICATIONS Cutting capacity: 102mm-279mm (4"- 11") Length: 1136mm Width: 12mm Thickness: 0.65mm TPI: 14...

In stock
+ −
Bramley Replacement HS4 Lower Blade For Hand Lever Shears 74-10
Out of stock
Add to wish list
Bramley Replacement HS4 Lower Blade For Hand Lever Shears 74-10
  $119.00 (Incl. GST)

FEATURES - Blades manufactured from high quality, wear resistant, precision ground tool steel - Simple lower blade adjustment for correct shearing...

Garrick Replacement Bandsaw Blade 2360 x 19 x 0.81mm 10-14TPI for BS712
Add to wish list
Garrick Replacement Bandsaw Blade 2360 x 19 x 0.81mm 10-14TPI for BS712
  $119.00 (Incl. GST)

For Garrick Bandsaw Model BS712 and BS200 SPECIFICATIONS Cutting capacity: 102mm-279mm (4"- 11") Length: 2360mm Width: 19mm Thickness:...

In stock
+ −
Bramley Replacement HS5 Upper Blade For Hand Lever Shears 53-09
Add to wish list
Bramley Replacement HS5 Upper Blade For Hand Lever Shears 53-09
  $399.00 (Incl. GST)

FEATURES - Blades manufactured from high quality, wear resistant, precision ground tool steel - Simple lower blade adjustment for correct shearing...

In stock
+ −
Tusk Diamond Blade General Purpose Turbo 230mm Big Bore TGP230BB
Add to wish list
Tusk Diamond Blade General Purpose Turbo 230mm Big Bore TGP230BB
  $89.00 (Incl. GST)

FOR CUTTING Concrete, ceramic, porcelain, terracotta, soft stone, bricks and pavers FEATURES Faster cutting than segmented blades Smoother...

In stock
+ −
Garrick Replacement Bandsaw Blade 1638 x 12 x 0.63mm 14TPI for BSB128
Add to wish list
Garrick Replacement Bandsaw Blade 1638 x 12 x 0.63mm 14TPI for BSB128
  $99.00 (Incl. GST)

For Garrick Bandsaw Model BS115 and BS128 SPECIFICATIONS Cutting capacity: 102mm-279mm (4"- 11") Length: 1638mm Width: 12mm Thickness:...

In stock
+ −
  • Save 17%
Bosch Starlock Multi-tool Sanding Plate 93mm 1ERAVZ93G 2608664926
Add to wish list
Bosch Starlock Multi-tool Sanding Plate 93mm 1ERAVZ93G 2608664926
$34.90   $29.00 (Incl. GST)

The Starlock AVZ 93 G sanding plate provides comfortable kickback-free sanding in corners. Its unique design features flexible corners and optimised plate...

In stock
+ −