Phone 09 834 0212

|
menu
menu

Accessories

Sort by: Popularity
24 Per Page
Dremel Multipurpose Depth Guide Attachment 565
Add to wish list
Dremel Multipurpose Depth Guide Attachment 565
  $12.50 (Incl. GST)

The Multipurpose Depth Guide allows for sturdy, controlled cuts in a variety of materials including: drywall, laminate, fiberglass, plastic and vinyl...

In stock
+ −
Desic Diamond Core Drill Holesaw With Pilot 55mm
Add to wish list
Desic Diamond Core Drill Holesaw With Pilot 55mm
  $145.00 (Incl. GST)

These are good for a variety of trades where you need to make a big hole in materials that are normally difficult to drill. The metal bonded diamond...

In stock
+ −
Desic Diamond Core Drill Holesaw With Pilot 45mm
Add to wish list
Desic Diamond Core Drill Holesaw With Pilot 45mm
  $125.00 (Incl. GST)

These are good for a variety of trades where you need to make a big hole in materials that are normally difficult to drill. The metal bonded diamond...

In stock
+ −
Desic Diamond Convex Turbo Grinding Cup 100mm
Add to wish list
Desic Diamond Convex Turbo Grinding Cup 100mm
  $139.00 (Incl. GST)

FOR GRINDING Hard cured concrete, masonry, greenstone, granite, marble, stone etc. FEATURES Convex shape allows easy carving and...

In stock
+ −
Desic Adjustable Circle Hole Cutter TCT Blades 2 Pack
Out of stock
Add to wish list
Desic Adjustable Circle Hole Cutter TCT Blades 2 Pack
  $18.90 (Incl. GST)

These TCT blades are very sharp for making clean and accurate holes with your circle hole cutter or downlight hole cutter. The bevelled back edge reduces...

Dremel Tungsten Carbide Cutter Pointed 3.2mm 9903 2615009903
Add to wish list
Dremel Tungsten Carbide Cutter 3.2mm 9903 2615009903
  $32.00 (Incl. GST)

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods...

In stock
+ −
Desic Turning Tool Replacement Insert Tip WCMX050308
Add to wish list
Desic Turning Tool Replacement Insert Tip WCMX050308
  $12.90 (Incl. GST)

Replacement tip as per photo. Titanium nitride coated YB435 tip for turning mild steel, stainless steel and cast iron.

In stock
+ −
Desic Diamond DRY Polishing Pad 125mm 800 Grit
Add to wish list
Desic Diamond DRY Polishing Pad 125mm 800 Grit
  $20.50 (Incl. GST)

Price is for ONE diamond polishing pad, angle grinder and backing pad not included (see our other products if you need them). For use with any...

In stock
+ −
Desic Combination Drill Tap 8mm M8
Add to wish list
Desic Combination Drill Tap 8mm M8
  $21.00 (Incl. GST)

Drill, tap and deburr in one operation. Now that's going to save you some time... The drill section must fully penetrate the material before tapping...

In stock
+ −
Dremel Tile Cutting Bit 3.2mm 2615000562
Add to wish list
Dremel Tile Cutting Bit 3.2mm 2615000562
  $25.90 (Incl. GST)

Ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. You can also create decorative wall tile by cutting a design,...

In stock
+ −
Desic Turning Tool Replacement Insert Tip DCMT070202
Add to wish list
Desic Turning Tool Replacement Insert Tip DCMT070202
  $12.90 (Incl. GST)

Replacement tip as per photo. Titanium nitride coated YB435 tip for turning mild steel, stainless steel and cast iron.

In stock
+ −
Desic Diamond DRY Polishing Pad 100mm 3000 Grit
Add to wish list
Desic Diamond DRY Polishing Pad 100mm 3000 Grit
  $18.50 (Incl. GST)

Price is for ONE diamond polishing pad, angle grinder and backing pad not included (see our other products if you need them). For use with any...

In stock
+ −
Desic TCT Hole Saw For Steel 42mm
Add to wish list
Desic TCT Hole Saw For Steel 42mm
  $44.00 (Incl. GST)

FOR HOLES IN Steel, stainless steel, aluminium and other non-ferrous metals. IDEAL FOR Sheet metal, steel plate, i-beams, RSJ's, galvanised...

In stock
+ −
Desic Diamond Core Drill Holesaw With Pilot 51mm
Add to wish list
Desic Diamond Core Drill Holesaw With Pilot 51mm
  $139.00 (Incl. GST)

These are good for a variety of trades where you need to make a big hole in materials that are normally difficult to drill. The metal bonded diamond...

In stock
+ −
Desic Diamond Lapidary Saw Blade 250mm x 0.8mm
Add to wish list
Desic Diamond Lapidary Saw Blade 250mm x 0.8mm
  $65.00 (Incl. GST)

These diamond lapidary cutting blades cut nice and smooth with minimal chipping. The very thin kerf means you're not wasting a lot of precious stone just...

In stock
+ −
Desic Diamond Carving Burrs 30 Pieces 4-6mm Cylinder
Add to wish list
Desic Diamond Carving Burrs 30 Pieces 4-6mm Cylinder
  $37.00 (Incl. GST)

This is a top quality diamond coated burr set from DESIC. With 30 cylindrical pieces you're bound to have the 'points' you need for your...

In stock
+ −
Desic Diamond WET Polishing Pads 7 Grits And 125mm M14 Backing Pad
Add to wish list
Desic Diamond WET Polishing Pads 7 Grits And 125mm M14 Backing Pad
  $159.00 (Incl. GST)

LET US KNOW IF YOU WANT TO MIX AND MATCH THE 7 POLISHING PADS, WE CAN MAKE SETS TO SUIT YOUR REQUIREMENTS. These diamond polishing pads can be...

In stock
+ −
  • Save 11%
Desic 3 Jaw Keyless Chuck for Dremel
Add to wish list
Desic 3 Jaw Keyless Chuck for Dremel
$18.00   $16.00 (Incl. GST)

This 3-jaw chuck holds drills and accessories from 0.4mm to 3.4mm (shank size) so it makes changing accessories a lot quicker because you don't have to find...

In stock
+ −
Desic Diamond Blade Continuous Tile 180mm
Add to wish list
Desic Diamond Blade Continuous Tile 180mm
  $55.00 (Incl. GST)

FOR CUTTING Ceramic, Porcelain, Marble, Granite FEATURES Ultra thin, cuts faster than segmented blades Smoother more professional...

In stock
+ −
Dremel Engraver Cutter Round 0.8mm 2 Pack 105A 26150105AE
Add to wish list
Dremel Engraver Cutter Round 0.8mm 2 Pack 105A 26150105AE
  $21.90 (Incl. GST)

Quality Cutter for detail graving, carving, routing in wood, fiberglass, plastic and soft metals. FEATURES Working diameter 0.8mm Shank...

In stock
+ −
Desic Diamond 2 Row Concrete Grinding Cup 150mm
Add to wish list
Desic Diamond 2 Row Concrete Grinding Cup 150mm
  $129.00 (Incl. GST)

This is a professional quality concrete grinding cup for general purpose use. It can quickly transform rough old concrete into a beautiful polished...

In stock
+ −
Desic TCT Hole Saw For Steel 35mm
Add to wish list
Desic TCT Hole Saw For Steel 35mm
  $37.00 (Incl. GST)

These hole saws have Tungsten Carbide Tipped (TCT) teeth that will cut through steel, stainless steel, ferrous and non-ferous metals and other...

In stock
+ −
Bosch Multi Material Angle Grinder Cut Off Disc 105mm 2608603043
Add to wish list
Bosch Multi Material Angle Grinder Cut Off Disc 105mm 2608603043
  $9.00 (Incl. GST)

These cutting discs are amazing the thin kerf slices through materials so fast, mush faster than the thicker typs of cutting wheel and they seem to last...

In stock
+ −
Dremel Collet Nut 2615297355
Add to wish list
Dremel Collet Nut 2610014582 IS
  $9.90 (Incl. GST)

Lost your nut? No problem we have a new one for you. It holds the collet in the shaft of ALL Dremel models. If you need a collet we have...

In stock
+ −