If you are installing a lot of heat pumps or multi-splits this will speed up your install time considerably. Once you have used this a few times your swages will become a joy, not a chore! If you're not convinced then give us a call, I have used these many times on pair coil and love them. Grant at Testntools.
SPIN is the new evolution for HVAC swaging tools from Brazil. The Swaging SPIN Tool is designed to deliver an ideal swage depth to each tube diameter, minimizing the vibration fatigue phenomenon, and giving a better assurance of leak-free systems.
The Swaging SPIN Tools were developed for soft and hard copper. The high-temperature generated preserves the copper’s/aluminium’s malleability while performing the swage, preventing cracks and leaks.
To perform the swage on copper/aluminium tubing, simply attach the corresponding SPIN Tool size to any cordless or power drill and run at maximum speed while applying pressure to the end of the tube. Within about 5 seconds the tube end will be heated and the swage created.
- Innovative new technology
- Flawless swages in about 5 seconds
- Works with any drill, recommend minimum 1800 rpm
- Eliminates the need for deburring before swaging
- Heat by friction anneals and burnishes for a secure seal
- Works with soft copper creating less cracks
- For hard drawn copper anneal first by heating and cooling
Compatible with 1/4", 3/8", 1/2", 5/8", 3/4", 7/8" tube sizes
Wall thickness 0.8mm (1mm for 5/8")
Colour coded hex shank
Made from alloy steel
WHAT YOU GET
1/4" (6.35mm) swaging tool
3/8" (9.5mm) swaging tool
1/2" (12.7mm) swaging tool
5/8" (15.88mm) swaging tool
3/4" (19.05mm) swaging tool
7/8" (22.23mm) swaging tool
Warranty 12 months
This part number replaces SSPIN300