This is a combined hoist and winch so it can be used for both lifting and pulling applications. It's compact and weighs only 6.9Kg so it's very portable. No special mounting is required, just hook onto a mounting point that can handle the load.
The remote control allows operation from a distance and at heights without the need to extend a pendant cable. This is a big advantage and cost saving in most circumstances.
The self-locking gear train with dynamic braking makes it fail-safe in the event of a power failure.
Up/down switch on hoist
Up/down infrared remote control
Motor overload protection
Thermal overload protection
LED load and overload indicator
Power cable strain relief
Drop forged alloy steel safety hooks
Swivel anchor hook
Lifting capacity 250Kg
Pulling capacity 500Kg
Single phase 100-240V 50/60Hz
Maximum input power 1200W
Infrared remote 2 x AAA's not supplied
Lifting height 8m
Lifting speed 5m/min
Wire rope diameter 4.8mm
Minimum headroom 480mm
Body size 260L x 195W x 210H mm
European 2006/42/EC EN14492-2 and EN60204-32
International CE certification, GS, EMC and RoHS
WHAT YOU GET
Portable electric hoist
Infrared remote control
Hook pull strap
12 MONTHS WARRANTY
- There is no limit switches on this hoist so you are expected to release the up/down button before it winds in or out too far. If you don't the hoist may be damaged.
What's the difference between and WINCH and a HOIST?
WINCHES are for PULLING - A 1000Kg winch could probably only lift 100Kg
HOISTS are for LIFTING - A 200Kg hoist could probably pull a 1000Kg load
Pulling is easier than lifting and a lifted load needs to be stopped with a brake.